EtherChannel config

==========PAgP Config:=============
Switch(config)# interface type mod/num
Switch(config-if)# channel-protocol pagp
Switch(config-if)# channel-group number mode {on | {{auto | desirable} [non-silent]}}

Example:
Switch(config)# port-channel load-balance src-dst-port
Switch(config)# interface range gig 3/1 – 4
Switch(config-if)# channel-protocol pagp
Switch(config-if)# channel-group 1 mode desirable non-silent
================================

=========LACP Config==============
Switch(config)# lacp system-priority priority
Switch(config)# interface type mod/num
Switch(config-if)# channel-protocol lacp
Switch(config-if)# channel-group number mode {on | passive | active}
Switch(config-if)# lacp port-priority priority

Example:
Switch(config)# lacp system-priority 100
Switch(config)# interface range gig 2/1 – 4 , gig 3/1 – 4
Switch(config-if)# channel-protocol lacp
Switch(config-if)# channel-group 1 mode active
Switch(config-if)# lacp port-priority 100
Switch(config-if)# exit
Switch(config)# interface range gig 2/5 – 8 , gig 3/5 – 8
Switch(config-if)# channel-protocol lacp
Switch(config-if)# channel-group 1 mode active
=================================

Desktop enhancement - Macubuntu

Free accounting system - Features | GnuCash

Many many icons - NounProject

NounProject

Extending LVM disks in Linux using Vmware virtual disks

Here is the current file system. It needs another 3Gb on the LogVol00 filesystem. The Linux system is a VMware virtual system with Virtual disks.

[root@dbvrac1 ~]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
9127580 6692828 1971088 78% /
/dev/sda1 101086 12651 83216 14% /boot
none 596544 0 596544 0% /dev/shm

The partitions are as follows

[root@dbvrac1 ~]# sfdisk -s
/dev/sda: 10485760
/dev/sdb: 10485760
/dev/sdc: 10485760
/dev/sdd: 10485760
/dev/sde: 10485760
/dev/sdf: 10485760

First the Vmware virtual disks needs to increase. 13Gb is the new size. Shutdown the Vmware guest and resize the disk on the Vmware host:

# vmware-vdiskmanager -x 13GB dbvrac1.vmdk
Using log file /tmp/vmware-root/vdiskmanager.log
The old geometry C/H/S of the disk is: 1305/255/63
The new geometry C/H/S of the disk is: 1697/255/63
Disk expansion completed successfully.

Start up the Vmware guest again.
This has added space on the /dev/sda partition. This can be seen by running sfdisk -s again:

[root@dbvrac1 ~]# sfdisk -s
/dev/sda: 13631488
/dev/sdb: 10485760
/dev/sdc: 10485760
/dev/sdd: 10485760
/dev/sde: 10485760
/dev/sdf: 10485760

To use the space, a partition first has to be created on /dev/sda

[root@dbvrac1 ~]# ls -al /dev/sda*
brw-rw---- 1 root disk 8, 0 Jun 29 2009 /dev/sda
brw-rw---- 1 root disk 8, 1 Jun 29 2009 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jun 29 2009 /dev/sda2

The new partition will be /dev/sda3.

[root@dbvrac1 /]# fdisk /dev/sda

Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 3
First cylinder (1306-1697, default 1306):
Using default value 1306
Last cylinder or +size or +sizeM or +sizeK (1306-1697, default 1697):
Using default value 1697

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

Validate that the new partition has been created

[root@dbvrac1 ~]# ls -al /dev/sda*
brw-rw---- 1 root disk 8, 0 Jun 29 2009 /dev/sda
brw-rw---- 1 root disk 8, 1 Jun 29 2009 /dev/sda1
brw-rw---- 1 root disk 8, 2 Jun 29 2009 /dev/sda2
brw-rw---- 1 root disk 8, 2 Jun 29 2009 /dev/sda3

/dev/sda3 is the new partition.
Reboot to load the new partition into the kernel.

Create a physical volume for LVM:

[root@dbvrac1 ~]# pvcreate /dev/sda3
Physical volume "/dev/sda3" successfully created

Add the new physical volume to the volume group:

[root@dbvrac1 ~]# vgextend VolGroup00 /dev/sda3
Volume group "VolGroup00" successfully extended

Extend the logical volume over the new space in the volume group.
Find out how much more space can be added:

[root@dbvrac1 ~]# vgdisplay
--- Volume group ---
VG Name VolGroup00
System ID
Format lvm2
Metadata Areas 2
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 2
Open LV 2
Max PV 0
Cur PV 2
Act PV 2
VG Size 12.88 GB
PE Size 32.00 MB
Total PE 412
Alloc PE / Size 315 / 9.84 GB
Free PE / Size 97 / 3.03 GB
VG UUID 7yenoW-lzsd-xK8a-j2Vj-qgty-TFXK-L0lhTL

There is 3.03Gb available.
Extend the volume:

[root@dbvrac1 ~]# lvextend -L+3.03G /dev/VolGroup00/LogVol00
Rounding up size to full physical extent 3.03 GB
Extending logical volume LogVol00 to 11.88 GB
Logical volume LogVol00 successfully resized

Resize the filesystem:

[root@dbvrac1 ~]# resize2fs /dev/VolGroup00/LogVol00
resize2fs 1.35 (28-Feb-2004)
/dev/VolGroup00/LogVol00 is mounted; can't resize a mounted filesystem!

Cannot use resize2fs as it is online. Use ext2online instead.

[root@dbvrac1 ~]# ext2online /dev/VolGroup00/LogVol00
ext2online v1.1.18 - 2001/03/18 for EXT2FS 0.5b

Check file system:

[root@dbvrac1 ~]# df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
12256820 6695112 4940796 58% /
/dev/sda1 101086 12651 83216 14% /boot
none 596544 0 596544 0% /dev/shm

ref.: Extending LVM disks in Linux using Vmware virtual disks - Dbvisit Community